2025 CLAAS Orbis 900

2025 CLAAS Orbis 900

The driving force of your harvesting team.

Despite its large working width, the ORBIS 900 corn header adapts perfectly to the contours of the field. Thanks to the flat, two-stage adjustable mounting angle and the very flat design, stubble heights of at least 3" (80 mm) can be achieved.

These characteristics and the use of both small and large three-stage transport discs mean that the ORBIS 900 can be used to harvest not only corn but whole crop silage, too.

Features may include:

• Very smooth-running drive with low starting torque and low power requirement

• Designed for high throughput capacity

• Universally suitable for harvesting stalked crops

• High quality of work and very low maintenance requirements

As with the ORBIS 750 corn front attachment, the ORBIS 900's frame consists of five parts. This makes it unrivaled for fast folding that takes just 25 seconds, in the case of the ORBIS 900.

In view of the transport width of only 9' 10" (3 m), it is possible to drive on the road with the ORBIS 900 without a special permit. The compact design of this corn header allows good visibility to the front and sides.

The ORBIS can be folded up to 9' 10" (3 m) for road travel. With the integrated transport system, you are always legally compliant on the road, and the actively controlled chassis enables ideal weight distribution for the whole vehicle. This allows a very comfortable ride up to 25 mph (40 km/h) and keeps the transfer times between fields as short as possible.

As with all CLAAS front attachments, the ORBIS corn header ensures maximum safety and comfort during road transport. The compact, folded ORBIS provides the operator with an excellent view when driving on the road.

The ORBIS row-independent corn header—with working widths from 14' 9" to 29' 6" (4.50 to 9.0 m)—combines completely new design and drive ideas with the experience we have gained around the globe. You will appreciate its well-thought-out features and excellent reliability every minute you work with it.

The ORBIS 600 SD corn header is offered parallel to the ORBIS 600.

The SD is particularly suitable for normal and short crops. The outer sections with the small discs and the additional vertical feed drums enable an extremely smooth crop flow. The ORBIS 600 with the large discs scores on all fronts in normal and very high-yield corn fields.

• Efficient drive concept with 11% lower starting torque than comparable models

• Unique crop flow for optimal quality of chopped material

• Optimum ground-contour following thanks to AUTO CONTOUR

• Very low stubble height across the entire working width

• Engage and reverse under full load

• Straight-line crop transfer from ORBIS to the JAGUAR forage harvester for top-quality chopped material

• Uniform crop flow across the entire width of the feed roller housing

• Extremely flat design for even stubble and very low stubble heights down to 3" (80 mm)

• ORBIS 600 SD with small discs for short to medium crop heights

• ORBIS 600 with large discs for medium to extremely tall corn

• Folds out symmetrically within 25 secs (ORBIS 900) or 15 secs (ORBIS 750)

• Integrated transport system available with ORBIS 600 and higher